Using Turf Pegs on Your Join
Once you have your grass in place with joining tape, secure the join with U-shape turf pegs. The addition of the turf pegs will better hide the join in your grass and help to keep the grass from lifting. Hammer in the pegs with one prong on either side of the join. We recommend placing the pegs every 300mm along the join to make sure it is secure. It’s important that you don’t trap any grass blades under the peg as you hammer. This is to ensure that the pegs are not visible. The best way to do this is by using the prong of a second peg to part the grass as you hammer into the space. This allows for a clear path for the peg to be hammered in without trapping blades of the grass.
Where else do I need to use turf pegs?
Hammer in turf pegs around the edges of your artificial grass at around 300mm intervals. Make sure to install the turf pegs as close to the edge as possible. If there is concrete haunching along the perimeter of the area, such as paving, you may need to install the turf pegs further away from the edge.
Leave a Reply