If you’re convinced that an artificial lawn is right for you, then this section has everything you need to know.
Follow these steps to have your own lawn ready in no time.
Step 1.
Measure your lawn. You need to know how much artificial turf you’ll need to cover the area you’ll have in mind. Measure the area carefully, and note how much you’ll need. Use this when you shop online or go to the hardware store to ensure you get the right amount.
Step 2.
Gather together the tools you’ll need, as listed above.
Step 3.
Remove existing turf: If you have a small area to remove, then this is easy to do with a shovel. If you’re covering a larger area, it could be a good idea to hire a turf cutter or similar tool to get the job done.
Step 4.
Add a layer of sand: Now the turf is gone, add a layer of sand to act as a base for your new lawn. Level the sand out so the artificial turf will lie flat.
Step 5.
Lay out the weed membrane: This is an important step, as it will prevent any weeds growing through your lawn. Make sure you’ve measured it properly, so you get the right coverage.
Step 6.
Roll out your grass: Roll out the turf to ensure it fits the area properly. Use the craft knife to cut around the edges and create a neat line.
Step 7.
Join and fix the grass down: Use the joining tape to fix different sections of grass together. Then, use pins around the edges to hold the new grass down in place.
That’s all there is to it. As you can see, there’s almost no reason why you can’t lay your own artificial lawn. If your lawn is looking tired, it may be time to replace it with the artificial alternative.
Leave a Reply